Samsung Flasher v1.1 By Gautam Kumar Free Download (2025) – Simple & Fast Samsung Flash Tool
Firmware Flash is a very important task when servicing Samsung Android phones. But many times new users and technicians face problems while using Odin or other complex tools.
To solve this problem, Samsung Flasher v1.1 By Gautam Kumar has become known as a simple, lightweight and effective Flash Tool.
This tool is basically designed in such a way that Samsung Firmware can be Flashed in one click, without any additional settings or complicated options.
What is Samsung Flasher v1.1?
Samsung Flasher v1.1 is a Windows-based Samsung Flashing Tool, which detects Samsung devices in Download Mode and automatically flashes the Firmware.
The biggest advantage here is—
- No need to select the model
- No need to set BL / AP / CP / CSC separately
- The tool starts working automatically if the firmware file is in the same folder
This is why it is popular with both new users and professional mobile technicians.
Samsung Flasher v1.1 Key Features
✔ One-Click Samsung Firmware Flash
✔ Auto Detect Download Mode Device
✔ .tar and .md5 Firmware Support
✔ PIT File Auto Flash (if available)
✔ No Manual File Selection Needed
✔ Lightweight & Fast Performance
✔ Beginner Friendly Interface
✔ Windows 7 / 8 / 10 / 11 Supported
This tool is mainly designed for Time-saving and Error-free Flashing.
What can Samsung Flasher v1.1 be used for?
- Using this tool, you can do—
- Samsung Stock Firmware Flash
- Bootloop Problem Fix
- Software Error Fix
- Auto Restart / Stuck Logo Fix
- Update or Downgrade Firmware
- Soft Brick Repair
⚠️ Note: FRP Remove or IMEI Repair is not the main function of this tool. It is mainly designed for Firmware Flashing.
How does Samsung Flasher v1.1 work?
Samsung Flasher v1.1 works in a completely automatic process.
When you launch the tool, it—
- Checks if the phone is in Download Mode
- Scans the Firmware (.tar/.md5) in the folder
- If everything is OK, Auto Flashing starts
There is no risk of selecting the wrong option here, so it is very safe for new users.
How To Use Samsung Flasher v1.1 (Step-by-Step)
1️⃣ Power Off Samsung Phone Completely
2️⃣ Press Volume Down + Power to enter Download Mode
3️⃣ Connect Phone to PC with USB Cable
4️⃣ Place Firmware (.tar/.md5) File in the same folder as Tool
5️⃣ Run Samsung Flasher v1.1.exe
6️⃣ Auto Flash will start once Tool Detects Phone
7️⃣ Phone Will Reboot Automatically Once Flash is Complete
⏳ Do not open USB Cable during Flash.
Samsung Flasher v1.1 System Requirements
- Windows OS: Windows 7 / 8 / 10 / 11 (64-bit recommended)
- USB Driver: Samsung USB Driver Installed
- RAM: Minimum 2GB
- CPU: Any Intel / AMD Processor
 – One Click Samsung Firmware Flash Tool){kind=link}
0 Comments